Multiplication Level 2

Multiplication Level 2

Ages 7–10 · 3 minutes · Math

Use flashcards to practice multiplication with medium products!

Use flashcards to practice multiplying with products up to 40, as well as some special products involving tens, and help Confetti the goldfish reach the finish line! Practice makes perfect, so keep trying until you can get all the questions correct before the countdown runs out.

Part of

Standards alignment

Common Core State Standards

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.

Alabama

  • MA19.3.7 — Use strategies based on properties and patterns of multiplication to demonstrate fluency with multiplication and division within 100.
  • MA19.3.7a — Fluently determine all products obtained by multiplying two one-digit numbers.
  • MA19.3.7b — State automatically all products of two one-digit numbers by the end of third grade.

Alaska

  • 3.OA.7 — Fluently multiply and divide numbers up to 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 ×5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90 (e.g., 9 x 80, 10 x 60) using strategies based on place value and properties of operations.

Arizona

  • 3.OA.C.7 * — Fluently multiply and divide within 100. By the end of Grade 3, know from memory all multiplication products through 10 x 10 and division quotients when both the quotient and divisor are less than or equal to 10.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Arkansas

  • 3.CAR.2 — Use basic fact fluency to multiply and divide whole numbers with mastery by the end of third grade. • Knowing all products with factors up to and including 12 and the corresponding division facts from the products with factors up to and including 12. • Using strategies such as the relationship between multiplication and division (e.g., Knowing that 8 ∙ 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations.
  • 3.CAR.4 — Use strategies to multiply one-digit numbers by multiples of 10 ranging from 10-90; strategies are based on place value and properties of operations (e.g., 9 ∙ 80, 5 ∙ 60).

California

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Colorado

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Connecticut

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Delaware

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Florida

  • MA.3.NSO.2.4 — Multiply two whole numbers from 0 to 12 and divide using related facts with procedural reliability.
  • MA.3.NSO.2.2 — Explore multiplication of two whole numbers with products from 0 to 144, and related division facts.
  • MA.K12.MTR.3.1 — Complete tasks with mathematical fluency. Mathematicians who complete tasks with mathematical fluency: • Select efficient and appropriate methods for solving problems within the given context. • Maintain flexibility and accuracy while performing procedures and mental calculations. • Complete tasks accurately and with confidence. • Adapt procedures to apply them to a new context. • Use feedback to improve efficiency when performing calculations.
  • MA.3.NSO.2.3 — Multiply a one-digit whole number by a multiple of 10, up to 90, or a multiple of 100, up to 900, with procedural reliability.

Georgia

  • 3.PAR.3.2 — Represent single digit multiplication and division facts using a variety of strategies. Explain the relationship between multiplication and division.
  • 3.PAR.3 — Use part-whole strategies to solve real-life, mathematical problems involving multiplication and division with whole numbers within 100.
  • 3.PAR.3.5 — Use place value reasoning and properties of operations to multiply one-digit whole numbers by multiples of 10, in the range 10-90.

Hawaii

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Idaho

  • 3.OA.C.7 — Demonstrate fluency for multiplication within 100.
  • 3.OA.C.7.b — Know from memory all products of two single-digit numbers and related division facts.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of ten in the range 10 – 90 using understanding of place value and properties of operations.

Illinois

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Indiana

  • 3.CA.6 — Demonstrate fluency with mastery of multiplication facts and corresponding division facts of 0 to 10.
  • 3.CA.5 — Multiply and divide within 100 using strategies such as the relationship between multiplication and division (e.g., knowing that 8 x 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. (E)

Iowa

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division or properties of operations. For example, knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8. By the end of Grade 3, flexibly, efficiently, and accurately find all products of two one-digit numbers. Note: Fluency of this standard is critical by the end of grade level.
  • 3.NBT.A.3 — Use place value and properties of operations to multiply onedigit whole numbers by multiples of 10 in the range 10–90. For example, 9 × 80, 5 × 60.

Kansas

  • 3.OA.7 — Fluently (efficiently, accurately, and flexibly) multiply and divide with single digit multiplications and related divisions using strategies (e.g. relationship between multiplication and division, doubles, double and double again, half and then double, etc.) or properties of operations.
  • 3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10 to 90 (e.g. 9 ⋅ 80, 5 ⋅ 60) using strategies based on place value and properties of operations.

Kentucky

  • KY.3.OA.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division or properties of operations.
  • KY.3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range of 10–90 using strategies based on place value and properties of operations.

Louisiana

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Maine

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Maryland

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Massachusetts

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 × 5 = 8) or properties of operations. By the end of grade 3, know from memory all products of two single-digit numbers and related division facts. For example, the product 4 x 7 = 28 has related division facts 28 ÷ 7 = 4 and 28 ÷ 4 = 7.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Michigan

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Minnesota

  • 4.1.1.1 — Demonstrate fluency with multiplication and division facts.
  • 4.1.1.2 — Use an understanding of place value to multiply a number by 10, 100 and 1000.

Mississippi

  • 3.OA.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. Know from memory all products of two one-digit numbers; and fully understand the concept when a remainder does not exist under division.
  • 3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Missouri

  • 3.RA.C.7 — Multiply and divide with numbers and results within 100 using strategies such as the relationship between multiplication and division or properties of operations. Know all products of two one-digit numbers.
  • 3.RA.C.8 — Demonstrate fluency with products within 100.
  • 3.NBT.A.4 — Multiply whole numbers by multiples of 10 in the range 10-90.

Montana

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.

Nebraska

  • 3.A.1.g — Fluently multiply and divide within 100 using strategies based on understanding and properties of operations.
  • 3.A.1 — Operations and Algebraic Thinking: Students will extend understanding of multiplication and apply operational properties to solve problems.
  • 3.A.1.h — Multiply one-digit whole numbers by multiples of 10 in the range of 10 to 90 using strategies based on place value and properties of operations.

Nevada

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

New Hampshire

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

New Jersey

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

New Mexico

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

New York

  • NY-3.OA.7.a — Fluently solve single-digit multiplication and related divisions, using strategies such as the relationship between multiplication and division or properties of operations.
  • NY-3.OA.7.b — Know from memory all products of two one-digit numbers.
  • NY-3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90 using strategies based on place value and properties of operations.

North Carolina

  • NC.3.OA.7 — Demonstrate fluency with multiplication and division with factors, quotients and divisors up to and including 10. • Know from memory all products with factors up to and including 10. • Illustrate and explain using the relationship between multiplication and division. • Determine the unknown whole number in a multiplication or division equation relating three whole numbers.
  • NC.3.NBT.3 — Use concrete and pictorial models, based on place value and the properties of operations, to find the product of a one-digit whole number by a multiple of 10 in the range 10–90.

North Dakota

  • 3.AR.OA.1 — Using mental strategies, multiply and divide basic facts within 100. Automatically multiply and divide up to 5x5 and 10s facts.
  • 3.NO.NBT.4 — Multiply one-digit whole numbers by multiples of 10 within 100.
  • 4.AR.OA.1 — Automatically multiply and divide through 10x10.

Ohio

  • 3.OA.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division, e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8, or properties of operations. Limit to division without remainders. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90, e.g., 9 × 80, 5 × 60 using strategies based on place value and properties of operations.

Oklahoma

  • 3.N.2.2 — Demonstrate fluency with multiplication facts using factors up to 10.
  • 4.N.1.3 — Applying knowledge of place value, use mental strategies (no written computations) to multiply or divide a number by 10, 100 and 1,000.

Oregon

  • 3.OA.C.7 — Fluently multiply and divide within 100 using accurate, efficient, and flexible strategies and algorithms based on place value and properties of operations.
  • 3.NBT.A.3 — Find the product of one-digit whole numbers by multiples of 10 in the range 10-90, such as 9 x 80. Students use a range of strategies and algorithms based on place value and properties of operations.

Pennsylvania

  • CC.2.2.3.A.3 — Demonstrate multiplication and division fluency.

Rhode Island

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 x 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of grade 3, know from memory all products of two single- digit numbers and related division facts. For example, the product 4 x 7 = 28 has related division facts 28 ÷ 7 = 4 and 28 ÷ 4 = 7.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

South Carolina

  • 3.ATO.7 — Demonstrate fluency with basic multiplication and related division facts of products and dividends through 100.
  • 3.NSBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10 - 90, using knowledge of place value and properties of operations.

South Dakota

  • 3.OA.C.7.a — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations.
  • 3.OA.C.7.b — Demonstrate fluency (skill in carrying out procedures flexibly, appropriately, efficiently, and accurately) for all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.
  • 3.OA.C.7 — Multiply and divide within 100.

Tennessee

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the properties of operations or the relationship between multiplication and division (e.g., knowing that 8 x 5 = 40, one knows 40 ÷ 5 = 8). By the end of 3rd grade, know all products of two one-digit numbers and related division facts.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (e.g., 9 x 80, 5 x 60) using strategies based on place value and properties of operations.

Texas

  • 3.4F — recall facts to multiply up to 10 by 10 with automaticity and recall the corresponding division facts;
  • 4.4B — determine products of a number and 10 or 100 using properties of operations and place value understandings;

Utah

  • 3.OA.7 — Fluently multiply and divide.
  • 3.OA.7.a — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division or properties of operations. (For example, knowing that 8 x 5 = 40, one knows 40 ÷ 5 = 8).
  • 3.OA.7.b — By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10–90 (for example, 9 x 80 and 5 x 60) using strategies based on place value and properties of operations.

Vermont

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Virginia

  • 3.CE.2f — Recall with automaticity the multiplication facts through 10 × 10 and the corresponding division facts.
  • 3.CE.2 — The student will recall with automaticity multiplication and division facts through 10 × 10; and represent, solve, and justify solutions to single-step contextual problems using multiplication and division with whole numbers. Students will demonstrate the following Knowledge and Skills:
  • 3.CE.2d — Demonstrate fluency with multiplication facts through 10 × 10 by applying reasoning strategies (e.g., doubling, add-a-group, subtract-a-group, near squares, and inverse relationships).

Washington

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

Washington, D.C.

  • 3.OA.C.7 — Fluently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 × 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations. By the end of Grade 3, know from memory all products of two one-digit numbers.
  • 3.NBT.A.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10—90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of operations.

West Virginia

  • M.3.7 — Fluently (efficiently, flexibly, and accurately) multiply and divide within 100 using strategies such as the relationship between multiplication and division and the properties of operations. By the end of Grade 3, know the multiplication table (facts) within 100 (Os10s) efficiently.
  • M.3.14 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90 (e.g., 9 x 80, 5 x 60) using strategies based on place value and properties of operations.

Wisconsin

  • M.3.OA.C.6 — Use multiplicative thinking to multiply and divide within 100. a. Use the meanings of multiplication and division, the relationship between the operations (e.g., knowing that 8 x 5 = 40, one could reason that 40 ÷ 5 = 8), and properties of operations (e.g., the distributive property) to develop and understand strategies to multiply and divide within 100. b. Flexibly and efficiently use strategies, the relationship between the operations, and properties of operations to find products and quotients with multiples of 0, 1, 2, 5, & 10 within 100.
  • M.4.OA.D.6 — Flexibly and efficiently multiply and divide within 100, using strategies such as the relationship between multiplication and division (e.g., knowing that 8 x 5 = 40, one knows 40 ÷ 5 = 8) or properties of operations [e.g., knowing that 7 x 6 can be thought of as 7 groups of 6 so one could think 5 groups of 6 is 30 and 2 more groups of 6 is 12 and 30 + 12 = 42 (informal use of the distributive property)].

Wyoming

  • 3.OA.C.7 — Fluently multiply and divide with factors 1 - 10 using mental strategies. By end of Grade 3, know automatically all products of one-digit factors based on strategies.
  • 3.OA.C — Multiply and divide within 100.
  • 3.NBT.E.3 — Multiply one-digit whole numbers by multiples of 10 in the range 10-90 (e.g., 9 × 80, 5 × 60) using strategies based on place value and properties of multiplication.